Specifications

Quickstart to Roland MDX-40 and Modela Player 4
61
Copyright © Freeform Digital
Example 2
Step 55
Cutting Position
A dialog box will keep track of the progress of cutting starting with Roughing2 and
Finishing2, through a progress bar.
Click Continue to proceed with cutting.
When everything is done, a message will inform you that the output is completed.
Click OK to close.
Output cutting to MDX-40
Cut
Click on the Cutting position
icon as shown. We need to set
the cutting positions of our
model.
In the Cutting position Setup
dialog box, set a frame of
15 mm for X and Y, under the
Model Position section at the
top right side.
Click OK to close.
Preview your 3D model before cutting by clicking on Preview Cutting button. This
triggers the Virtual Modela utility program. Check on the time taken to cut for
roughing and nishing respectively.
Click on the Cut tool at the bottom of the interface. This will be the nal command
to issue, where the data from the 3D model is sent to the MDX40 machine for
cutting.
Click OK to cut.
Preview Cutting