Specifications

Quickstart to Roland MDX-40 and Modela Player 4

(7-1) Clicking this displays the setting items for the process.

To change a setting, double-click the item.

(7-2) indicates the process type.

: Surface leveling

: Roughing

: Finishing

: Drilling

(7-3) indicates whether the cutting data is output.

(7-4) shows the name of process. To change the name, select

the process, then click this again.

(7-5) indicates the presence or absence of cutting-data

output for the cutting surface (or for the project).

You can switch between presence or absence of data output

for all processes that are presently displayed.

(7-6) shows the cutting surface or the project name.

Controller

(1) Model - makes the settings for the size and orientation of

the imported 3D model.

(2) Material - chooses the composition of the workpiece. If

the selection for the composition is not available, add it to the

material library.

(3) Number of Cutting Surfaces - sets the number of cutting

surfaces on the workpiece. You can choose one, two, or four

surfaces.

(4) Modeling Form - makes the settings for the space around

the model to provide approach paths for the tool.

You can also set the depths and slope angles of the walls for

each cutting surface.

(5) New Process - creates a new cutting process.

(6) Cutting Surface Tab - lets you choose the surface to cut.

The process list for the selected cutting surface appears.

(7) Process List - displays a list of processes in tree format.