Specifications

Quickstart to Roland MDX-40 and Modela Player 4

Example 2

Step 34

Arrow marking

Step 35

Set sensor and hole drilling

Use a marker to draw an arrow as shown. This is to indicate the direction at which the model is taken out, so

that we will remember its position. It will aid us in turning over the model in the correct direction later.

Now, use any solvent like alcohol to remove the model from the wood base support.

Position sensor on top of the wood

piece. Place tool just above the sensor.

For details on how we do this, refer to

the previous example on tool zeroing.

Start drilling the 1st hole on the

wood base support.

Drill the subsequent holes

accordingly.