Specifications

Quickstart to Roland MDX-40 and Modela Player 4
41
Copyright © Freeform Digital
Example 2
Step 12
Start another process - Finishing this
time. By now, you should realise that
the process creation for cutting 3D
models is the same as before.
Click New Process icon on the right.
In the dialog box that appears, select
Finishing and click NEXT.
Step 13
For cutting surface, select Top surface to be cut.
Click NEXT.
Step 14
Select R1.5 Ball mill for the cutting tool.
Click NEXT.
Step 15
Ensure All option is selected for cutting
area and depth page. Also, check that the
layout of the model is correctly laid out
as shown on the right.
Click NEXT.
Define Finishing on model
Choose cutting surface
Choose tool diameter
Set area and depth for
Finishing
115.89
93.74