Specifications

Quickstart to Roland MDX-40 and Modela Player 4

Example 1

At the Cutting Parameters page, the default

conguration is displayed out in a list. The default

setting depends on the diameter of the tool you

have selected previously.

You can change these parameters if you know how

to tweak them to cut faster or slower depending on

the results desired.

Step 20

Enter the values as shown on the right. If you

have changed your mind about certain values,

you can click on the Initialize button to reset to

the default values previously.

Initialize - resets the all cutting parameters to

their initial values.

Click NEXT to continue.

Step 21

In the Create Tool Path page, enter a name to

save your tool path. The name appears in the

Controller process list.

Name your Process Name as Roughing1 and

choose Later option.

Click Finish to close when you are done.

Set cutting patameters

Save Roughing process

15000