Specifications

Quickstart to Roland MDX-40 and Modela Player 4

Example 1

Step 7

Continue next to click on the New Process

icon. A New Process dialog box appears.

This lets you choose the type of process.

Surfacing

This lightly cuts the surface of the workpiece to create a level surface.

Roughing

This cuts the workpiece to the approximate shape.

Finishing

This cuts the nal shape of the model.

Drilling

This drills holes in the model and surrounding workpiece.

Let’s start with surfacing on the material. So check on Surfacing option, and click Next to continue.

This Cutting Surface page lets you choose

the surface to cut.

Top / Bottom / Front / Back - lets you choose the

cutting surface to select it.

Note that when there is only one cutting surface, no

selections other than the top surface are available.

Click Next to continue.

Drag down the Tool List to select 6mm Square for the

tool that we will be cutting.

You cannot choose a tool for which no cutting

parameters have for the material have been

registered.

To register cutting parameters, quit this wizard

temporarily, then go to Options and click Register

Cutting Parameters.

Tool Specifications displays the specications of the

tool you have chosen.

Click Next to continue.

Step 8

Step 9

Define Surfacing on model

Choose cutting surface

Choose tool diameter