Specifications

Quickstart to Roland MDX-40 and Modela Player 4

Example 1

Step 6

Click on the next button

Modeling Form. This makes

the settings for the space

around the model to provide

approach paths for the tool.

The Modeling Form dialog box

displays 4 tags for you to edit your

options.

Under the Margin tag:

Automatic - This automatically sets

the margins around the model.

Manual - Make the settings for the

margins you want around the model.

So choose Manual, input 5 mm for

a margin around the cutting of the

model.

Choose the Depth tag.

Preview - This displays the cutting-depth locations.

It lets you check the depths to which the model is cut. You can

also rotate, move, or zoom the view, or t it to the screen. *

Top/Bottom, Front/Back allows you to choose the surface whose

cutting depth you want to set. Change the depth by dragging the

red line down all the way to the bottom.

Or you can set the cutting depth by inputing a value for Top

Depth. You can make the setting for Front/Back when you are

performing four-surface cutting.

Tap on the Slope tag now.

When perpendicular walls are higher than the length of the

blade, the tool does not reach bottom.

Adding slope to the walls enables approach by the tool. So check

on Make sloped option. Input 20 degrees for the Top.

Tap on Cutting Area.

This shows the displays of the

modeling form that you have

already set. Click OK to close.

*see Appendix A for more explanations

Forming model for cut