User Manual

68
7. Troubleshooting
Machine/VPanel Problems .................................69
The Power Does Not Turn On ...............................................69
Initial Operations Are Not Performed or Fail ..........................69
VPanel Doesn't Start Correctly ..............................................69
Operations Are Ignored..........................................................70
Detection with the Z0 Sensor Fails ........................................70
Automatic Correction Fails ..................................................... 71
Abnormal Cutting Is Performed .............................................71
When the Machine Stops with the Tool Bur Inserted in the Workpiece .. 71
No Data Can Be Output to the Machine or the Machine Does Not
Operate Even Though Data Is Being Output .........................72
Misaligned Origins .................................................................72
Quality Problems ................................................73
The Cutting Results Are Not Attractive ..................................73
Installation Problems ..........................................74
Installing the Driver Separately ..............................................74
Installing the Software and the Electronic-format Manuals Separately .. 76
Driver Installation Is Impossible .............................................77
Uninstalling the Driver ............................................................78
Uninstalling VPanel................................................................79
An Error Message Appears ................................80