User Manual

66
"Cut" Dialog Box
Click on the top window to display the "Cut" dialog box.
"Cut" Dialog Box
Use this dialog box to output cutting data to the machine.
Output le
list
This displays a list of the output les. The les are output in order starting from the
top of the list.
Add
Displays the "Open" dialog box, which you can use to add a le that you want to output
to the output le list indicated with
1. You can also add les by dragging them to
the output le list.
Delete
Deletes the selected le from the list.
Delete all
Deletes all the les from the list.
Moves the selected le up or down in the list.
Test
Tests the program operations on the actual machine. The "Test cut" dialog box appears.
This button is only enabled in NC mode.
P. 67 ""Test cut" Dialog Box"
Pause at each le
Select this check box to pause the output for each le.
Initial value: Cleared
Output
Outputs the les in the list to the machine in order from the top. When you click this
button, this dialog box closes.
6. VPanel Operation (Practical Use)