User Manual

64
"Cutter management" Dialog Box
"Cutter registration" Dialog Box
You can change a tool bur's registration information in order to change the work time or the replacement time.
- [Cutter registration]
Tool bur list
Displays the names, work times, and replacement times of the registered tool burs.
Tool bur infor-
mation
Cutter name Displays the tool bur name. You can also set the name.
Work time Displays the tool bur work time. You can also set the work time.
Replacement
time
Displays the tool bur replacement time. You can also set the re-
placement time. If you set this to "0," the warning message when
the replacement time is reached will not be displayed.
Initial value: 0
Reset Reset the work time of the tool bur to "0."
Save You can edit the name, work time, and replacement time of the
tool bur selected in the list. Click [Save] to save the edited content
(the existing content is overwritten).
Because replacement times depend on the type of tool bur or
workpiece as well as the cutting conditions, adjust the replace-
ment time value as necessary.
Add cutter
Registers an additional tool bur. You can register up to 20 tool burs.
Copy cutter
Duplicates the selected tool bur. Enter a dierent name for the "Cutter name."
The "Work time" is set to "0," and the "Replacement time" is duplicated.
Remove cutter
Deletes the tool bur selected in the list.
6. VPanel Operation (Practical Use)