User Manual

63
Click on the top window to display the "Cutter management" dialog box.
"Cutter management" Dialog Box
By using this dialog box to select tool burs to be used, the work time of the selected tool burs will be recorded automatically.
In addition, when the bur reaches the preset replacement time, a warning message will be displayed.
No.
Register tool bur information to match the machine's ATC magazine stocker numbers.
 P. 64 ""Cutter registration" Dialog Box"
Stocker number
Cutter
Click
to display the tool burs that have been registered. Select the name of a tool bur that
has been loaded in a stocker to display the name on the VPanel top window. However, you
cannot select or change tool burs from the Cutter management screen for the stocker whose
tool bur currently holds the spindle.
Also, the "Work time" will not be counted if you do not select a tool bur.
 P. 64 ""Cutter registration" Dialog Box"
Work time/Re-
placement time
Displays the work time and replacement time of the selected tool bur. When the bur reaches
the preset replacement time, a warning message will be displayed. Click "Cutter registration"
to change the replacement time.
 P. 64 ""Cutter registration" Dialog Box"
Reset
After replacing the tool bur with a new one, click [Reset] to set the work time to "0."
Cutter registra-
tion
Click this button to register a tool bur whose work time you want to manage or to remove burs
you no longer want to manage. The "Cutter registration" dialog box appears.
 P. 64 ""Cutter registration" Dialog Box"
"Cutter management" Dialog Box
6. VPanel Operation (Practical Use)
Tool bur information