User Manual

61
"Settings" Dialog Box
"Manual correction" Dialog Box
- [Correction] tab - [Manual correction]
Distance
Set the distance correction values.
X, Y, Z Set the correction value (scaling) for each axis.
A axis back side
Detect the rotary axis and correct its position and orientation. This is only enabled when
the (optional) rotary axis unit is attached.
A Set the A-axis inversion correction value.
Axis angle correction
for the center of rota-
tion
Set the rotary axis tilt correction value. This is only enabled when the (optional) rotary
axis unit is attached. See the user's manual included with the rotary axis unit.
Point1-X/Point2-
X
Set the numeric values.
6. VPanel Operation (Practical Use)