User Manual

"Settings" Dialog Box

"NC code setting" Dialog Box

- [Cutting Machine] tab - [NC code]

[NC code] Tab

Tool-diameter offset type

Select the tool diameter correction type. You can select "A" or "B."

Initial value: A

Values with decimal point

Select how to interpret real numbers. If you select "calculator interpretation," also

select the scope of the application.

Initial value: Conventional

Optional block

skip

Select whether to skip optional blocks.

Initial value: Enabled

[Tool-diameter Offset] Tab

No.

Displays the number of the tool diameter correction value. (1 to 12)

* These are not related to the ATC magazine stocker numbers.

Initial value: 0

Offset

Set the tool diameter correction value.

Unit: [mm], [inch]

6. VPanel Operation (Practical Use)