User Manual

6. VPanel Operation (Practical Use)

"Settings" Dialog Box

Click on the top window to display the "Settings" dialog box. You can use this dialog box to congure the operation

settings of the connected machine. When the machine is oine, you can only select the "Environment", "Maintenance", and

"Notication" tabs.

"Preferences" Tab

You can use this tab to set the language and units that are displayed in VPanel.

Unit

Select the unit to use for coordinate values and lengths.  Initial setting: Millimeters

Language

Select the language to display on the screen. After you select the language, restart

VPanel to enable this setting.

P. 8 "Exiting VPanel"

"Machine" Tab

You can use this tab to congure settings related to VPanel auto-startup and NC codes. You cannot select this tab when the

machine is oine.

Command set

Select the command set.

 Initial setting: Automatic switching between RML-1 and NC code

RML-1 Select this option when using the software included with this

machine.

NC code Select this option when you want to use NC codes.

For details on NC codes, see P. 88 "NC Code Specications"

and the "NC Code Reference Guide" (electronic-format manual)

included with this machine.

Selected

automatically

(RML-1/ NC

code)

Select this option to enable this machine to receive cutting

programs that use either the RML-1 or NC code command set.

NC code set-

ting

Click this button to display the "NC code setting" dialog box.

Use this dialog box to congure NC code settings. This button is

only enabled when "NC code" or "Automatic switching between

RML-1 and NC code" is selected.

 P. 58 ""NC code setting" Dialog Box"