User Manual

48
Built-in Panel Functions
5. Built-in Panel Operation (Practical Use)
Recovering from Errors
Recoverable errors can be cleared from the built-in panel. Check the message displayed on the panel. Eliminate the cause
of the error by using P. 80 "An Error Message Appears" as a reference.
When an Error That Has Options Occurs
Procedure
A
Turn the hand-wheel to select "Continue" or "Cancele Job."
Continue: Resume cutting.
Cancele Job: Cancel cutting.
B
Press [ENTER].
The machine recovers from the error.
When an Error That Does Not Have Options Occurs (Recoverable)
Procedure
A
Press [ENTER].
The machine recovers from the error. You can only select "OK."
When an Error That Does Not Have Options Occurs (Non-recoverable)
Check the displayed message, and then see P. 80 "An Error Message Appears" and follow the countermeasures listed there.
Example) Error : 1006-0204
Example) Error : 102A-0000
Example) Error : 1023-0000