User Manual

45
Built-in Panel Functions
5. Built-in Panel Operation (Practical Use)
Operation of the Tool Bur Replacement Function (Auto Tool Changer)
You can use the built-in panel to switch tool burs. This operation is not possible in the following cases.
When the front cover or dust box cover is open
When cutting is paused and during cutting
Procedure
A
Press [MENU] several times to display the following screen.
B
Turn the hand-wheel to select the function.
Display Function
Tool Bur 1 to Tool Bur 6 Obtain the tool bur of the selected number. If a tool bur with a dierent number
from the selected one is currently being held, the held tool will be returned,
and then the selected tool bur will be obtained.
Return Tool Bur Return the tool bur to the magazine.
Forced Release The retained tool bur is released above its stocker. Follow the messages displayed
on the built-in panel to take action accordingly.
C
Press [ENTER].
The machine operates. Press [MENU] several times to return to the top window.
Move the mark to
select the function.