User Manual

43
Built-in Panel Functions
5. Built-in Panel Operation (Practical Use)
G57-XY
Workpiece coordinate
system origin 4
Cleaning - XY
This function is used for cleaning. The spindle
and table move.
G58-XY
Workpiece coordinate
system origin 5
Rotation A
The rotary axis unit rotates. This can only be
used when the (optional) rotary axis unit is
attached.
* In NC mode, "User Coordinates - XY" is not displayed.
C
Press [ENTER].
The operation starts. Press [MENU] several times to return to the top window.
Changing the Coordinate System
" P. 22 "User Coordinate System and Machine Coordinate System"
User coordinate system: You can freely set the origin.
Machine coordinate system: The origin position is xed, so you cannot change the origin setting.
Procedure
A
Press [MENU] several times to display the following screen.
B
Press [COORD.SYSTEM] to select the coordinate system.
This displays the current tool bur position. (Unit: mm)
Coordinate Systems in RML-1 Mode
 User Coordinates: User coordinate system
 Machine Coordinates: Machine coordinate system
Coordinate Systems in NC Code Mode
 G54 : Workpiece coordinate system 1
 G55 : Workpiece coordinate system 2
 G56 : Workpiece coordinate system 3
 G57 : Workpiece coordinate system 4
 G58 : Workpiece coordinate system 5
 G59 : Workpiece coordinate system 6
 EXFOS : Coordinate system specied by EXOFS
 Machine Coordinates: Machine coordinate system
Each time you press [CO-
ORD.SYSTEM], the coordi-
nate system of the tool bur
position display changes.