User Manual

42
Built-in Panel Functions
5. Built-in Panel Operation (Practical Use)
Quickly Moving to a Specic Position
Use this procedure to quickly move to the view position or to the origin. The tool bur is always kept in the highest position
along the Z axis and only moves to the specied position along the X and Y axes. You cannot perform this operation during
cutting or while cutting is paused.
WARNING
This procedure makes the machine operate.
Before you perform this procedure, check to make sure that operation of the machine will
not create any hazard or danger.
Procedure
A
Press [MENU] several times to display the following screen.
B
Use the hand-wheel to select the movement destination.
The display diers depending on the selected command set.
RML mode
Display Function
View
The spindle head moves to the left edge
and the table moves to the front.
User - XY
Moves the tool bur to the XY origin in
the user coordinate system.
Machine
Coordi-
nates - XY
Moves the tool bur to the XY origin in the
machine coordinate system.
Cleaning
- XY
The spindle head moves to the right
edge and the table moves to the back.
Rotation A
The rotary axis unit rotates. This can only
be used when the (optional) rotary axis
unit is attached.
NC mode AUTO mode
Display Function Display Function
View
View position
G59-XY
Workpiece coordinate system origin 6
G54-XY
Workpiece coordinate
system origin 1
EXOFS-XY
Position specied by EXOFS
G55-XY
Workpiece coordinate
system origin 2
User Coordi-
nates - XY*
User coordinate system origin
G56-XY
Workpiece coordinate
system origin 3
Machine Co-
ordinates - XY
Machine coordinate system origin
The tool bur moves to the
position whose
mark is lit.