User Manual

37
Periodic Maintenance
4. Maintenance
Retightening the Collet
Continuous cutting will cause the collet to become loose, making it easy for the tool bur to come o. Periodically retighten
the collet.
Recommended Interval for This Work
Once a month, or when the working time of the spindle exceeds 200 hours since the previous retightening
(with slight variation depending on the work situation).
" P. 60 ""Spindle maintenance" Dialog Box"
Required Items
Detection pin Wrench Cloth for care
1. Open the collet.
A
Remove the workpiece and return the tool bur to the ATC magazine.
" P. 45 "Operation of the Tool Bur Replacement Function (Auto Tool Changer)"
B
Clean off any cutting waste around the spindle.
" P. 31 "Cleaning after Cutting Finishes"
C
Display VPanel.
" P. 7 "Displaying VPanel"
D
Click and then the [Maintenance] tab.
The VPanel "Maintenance" tab appears.
E
Click [Open collet].