User Manual

31
4. Maintenance
Daily Maintenance
Cleaning after Cutting Finishes
After cutting nishes, clean the inside of the machine using a commercially available brush or dust collector. Also clean the
tool bur.
WARNING
Do not inadvertently touch the computer or the operating panel while performing this
task.
Unintended operation of the machine may lead to you being caught in the machine.
1. Clean the inside of the machine.
A
Remove the workpiece that has been cut and return the tool bur to the ATC magazine.
If the material cannot be peeled o cleanly, use a tool such as a spatula to remove it.
B
Move the spindle and the table to the cleaning position.
" P. 42 "Quickly Moving to a Specic Position"
C
Clean the inside of the machine.
Brush o the cutting waste that has fallen on the X- and Z-shafts and around the table using a commercially
available brush.
Cutting waste
also collects be-
hind the spindle
head. Check
that no cutting
waste has col-
lected here.
Important
Carefully clean off any cutting waste in the area around the magazine, as
cutting waste afxing to this area may affect the cutting results.
Remove any cutting waste that is present
on the surface of the spindle head. If
cutting waste remains in the vicinity of the
ventilation port for a long period of time,
the blower's functionality may decrease.
Ventilation port