User Manual
30
4. Maintenance
Maintenance Precautions
Maintenance Precautions
WARNING
Never use a pneumatic blower.
This machine is not compatible with pneumatic blowers. Cutting waste may get inside the
machine and cause re or electrical shock.
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause re.
WARNING
Be sure to perform operations as specied by the instructions, and never touch any
area not specied in the instructions.
Sudden movement of the machine may cause injury or burns.
WARNING
When using a dust collector to take up cutting waste, exercise caution to prevent re
and explosions of dust.
Taking up ne cuttings using an ordinary dust collector may result in re or explosion. Check
with the manufacturer of the dust collector. When the safety of use cannot be determined,
clean the machine using a brush or the like, without using a dust collector.
WARNING
Caution: High Temperature. Do not touch the spindle unit or the surrounding areas
immediately after cutting has ended.
Doing so may result in burns.
CAUTION
Be sure to remove the cutting tool before performing maintenance.
Contact with the blade may result in injury.
This machine is a precision device. Carry out daily care and maintenance.
Carefully clean away cutting waste. Operating the machine with cutting waste present may cause a malfunction.
Never use silicone substances (oil, grease, sprays, etc.). Doing so may cause poor switch contact.