User Manual

26
3. Cutting
3. Cutting (One Side Cutting)
E
Turn the hand-wheel to select "Yes."
F
Press [ENTER].
The tool bur slowly descends to touch the sensor. The tool bur then ascends. When it stops moving, the setting
is complete.
Canceling the detection operation
If you want to stop the tool bur while it is descending, press [ENTER].
4. Remove the Z0 sensor and the detection pin.
A
Return the detection pin.
1 Press [MENU] several times to select "ATC Tool Bur."
2 Turn the hand-wheel to select "Return Tool Bur."
3 Press [ENTER].
The machine operates, and the detection pin is returned. Press [MENU] several times to return to the top window.
B
Remove the Z0 sensor.
1 Open the front cover.
2 Remove the Z0 sensor.
3 Attach the protective "Z0 SENSOR/ROTARY" cap.
C
Close the front cover.
D
Press [ENTER].
CAUTION
Remove the cable while holding the part shown
in the following gure. If you hold a part other
than that shown in the gure, the connecting
parts may be damaged.
Position to hold