User Manual

20
3. Cutting
3. Cutting (One Side Cutting)
CAUTION
When using the 3 mm, 4 mm (0.12 in., 0.16 in.) tool holder, insert the tool bur 10 mm (0.39 in.) or more from the bottom of
the tool holder.
C
Use the hexagonal screwdriver to secure the mounting screw.
ROTARY
TABLE
SHANK
END
Step 2 : Loading the Tool Bur on the Machine
WARNING
Securely fasten the cutting tool and workpiece in place. After securing in place, make
sure no wrenches or other articles have inadvertently been left behind.
If you do not check for these articles, they may be thrown from the machine with force, pos-
ing a risk of injury.
CAUTION
Be careful around the cutting tool.
The cutting tool is sharp. Broken cutting tools are also dangerous. To avoid injury, exercise
caution.
Procedure
A
Perform movement to the view position.
Move the table to the front to make this work easier.
" P.42 "Quickly Moving to a Specic Position"
B
Open the front cover.
10 mm (0.39 in.) or
more