User Manual
17
3. Cutting (One Side Cutting)
2. Items Necessary for Cutting
Cutter
Select a tool bur matched to the purpose. We recommend that you use the tool burs selectively to match dierent work
processes (such as roughing and nishing). Contact your authorized Roland DG Corp. dealer or visit the Roland DG Corp.
website (http://www.rolanddg.com/) to purchase tool burs.
Loadable Tool Bur Conditions
* 30 to 80 mm (1.18 to 3.15 in.) when using a rotary axis (optional)
Workpiece (Cutting Material)
There is a wide variety of workpieces. Use workpieces selectively according to the object to create.
* Never use this machine to cut metal.
Scrap Board
A scrap board is a board that is placed under the workpiece when cutting it so that the table is not cut. It is used as a temporary,
subsidiary material in situations such as when cutting out the workpiece and when drilling holes for positioning when cutting.
Scrap board
Workpiece
Table
P.18 "Step 1 : Preparing the Tool Bur"
3, 4, 6 mm or 0.125, 0.25 in.
30 to 90 mm (1.18 to 3.54 in.)*