User Manual

15
3. Cutting (One Side Cutting)
Machine Statuses Indicated by Status Light Color
What Is the Status Light?
Lights are installed inside this machine. The color of the lights changes depending on the status of the machine. You can
also turn o the lights during cutting.
" P.49 "Turning Off the Status Lights during Cutting"
Blue
Lit The machine is in standby.
Flashing Initialization is in progress.
White
Lit The machine is cutting or a cover has been opened.
Flashing Cutting warm up is in progress.
Yellow
Lit
An error for which it is possible to resume cutting occurred. The machine has
paused.
Check the error details shown on the built-in panel or in VPanel.
P.80 "An Error Message Appears"
Red
Lit
An error for which it is not possible to resume cutting occurred. Cutting will stop.
Check the error details shown on the built-in panel or in VPanel.
P.80 "An Error Message Appears"
Flashing
An error for which it is not possible to resume cutting occurred. Cutting will stop.
Turn o the power, and then restart the machine.
Off
The status lights are o.