Setup Guide
46
MDX-50
Cuttable material Resins such as chemical wood and modeling wax (metal not supported)
Operating range X, Y, Z: 400 × 305 × 135 mm (15.8 × 12.0 × 5.3 in.)
Loadable workpiece size X, Y, Z: 400 × 305 × 100 mm (15.8 × 12.0 × 3.9 in.)
Axis drive system Stepping motor
Operating speed X, Y: 7 to 3600 mm/min (0.3 to 141.7 in./min)
Z: 7 to 3000 mm/min (0.3 to 118.1 in./min)
Software resolution 0.001 mm/step (0.039 mil/step; RML-1)
0.001 mm/step (0.039 mil/step; NC code)
Mechanical resolution 0.01 mm/step (0.39 mil/step; half step)
Spindle motor Brushless DC motor
Spindle rotation 4500 to 15000 rpm
Number of tools housed 6 (However, one tool is also used as the detection pin.)
Attachable tool mm
specica-
tions
Shank diameter: 6 mm, tip diameter: 6 mm or less, length:
30 to 90 mm
* Tools with shank diameters of 3 mm or 4 mm can be
used by installing them in the included tool holder.
inch
specica-
tions
Shank diameter: 0.25 in. tip diameter: 0.25 in. or less, length:
30 to 90 mm (1.18 to 3.54 in.)
* Tools with shank diameters of 0.125 in. can be used by
installing them in the included tool holder.
Interface USB
Control command sets RML-1, NC code
Power requirements AC 100 to 240 V ±10%, 50/60 Hz (overvoltage category: II, IEC 60664-1)
1.2 A
Power consumption Approx. 95 W
Operating noise During operation: 60 dB (A) or less (when not cutting)
During standby: 45 dB (A) or less
External dimensions Width × depth × height: 760 × 900 × 732 mm (29.92 × 35.43 × 28.82 in.)
Weight 122 kg (269 lb.)
Installation environment Indoor use at altitudes up to 2000 m
Temperature: 5 to 40°C (41 to 104°F)
Humidity: 35 to 80%RH (no condensation)
Ambient pollution degree: 2 (as specied by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Included items Power cord, USB cable, manual, Roland DG Software Package CD, detection
pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool
positioner, Z0 sensor, etc.
System Requirements for USB Connection
Computer
A model preinstalled with Windows 10, 8.1, or 7 (32 or 64 bit) or an upgraded com-
puter originally preinstalled with Windows 7 or later
USB cable
Use the included USB cable.
Specications