Setup Guide

40
Power Rating and Serial Number Location
Expansion Port Specications
Important
Be sure to turn o the power of machine when the cable connect (or remove) to the machine.
Connecting (or removing) the cable to the cutting machine while the cutting machine is on may
cause malfunctions
.
* We are not responsible for devices connected to this port.
Expansion port 1
PIN number Signal Overview/function
1
24V Set the output up to 100 mA.
2
SPINDLE_ON This signal activates during spindle rotation.
3
N.C.
2
Machine Specications
Serial number
The serial number is required for maintenance, servicing, and
support. Never peel o the label.
Power rating
Use a power supply that meets the requirements for voltage,
frequency, and amperage given here.
+24 V
GND
Note
Do not use terminal 3.
Use only terminals 1 and 2.
30 mm or less
Ferrite Core
Attach the ferrite core to the
cable to be connected to
the expansion port1.