Setup Guide
Preparing the Machine for Use
38
2.
Perform automatic correction.
A
Click in the VPanel top menu, the [Correction] tab, and then click [Automatic cor-
rection].
The VPanel "Automatic correction" dialog box appears.
B
Select the [Magazine] check box, and then click [Start Correction].
You can use the [Rotary axis unit] check box when you are using the optional rotary axis unit.
Automatic correction starts.
C
When the window shown in the following î‚¿gure appears, click [OK].
D
Once automatic correction is complete, remove the detection pin.