Setup Guide

Installing the Machine
20
Step 2 : Removing the Retainers
Attach the retainers to protect the machine from vibration during shipment. When installation is complete,
remove these and store them in the specied locations.
WARNING
Carry out these operations before you connect the power cord.
The power turning on inadvertently during these operations may result in
pinched hands or other injury.
Important
• Remove all the retainers. Any that remain may cause faulty operation or a breakdown
when the power is switched on.
• The retainers will be required when moving the machine to a dierent location. Secure
them to this machine for storage so that they do not get misplaced.
Procedure
A
Remove the retainers in the locations shown in the following gure using a hexagonal
wrench. (2 locations)
B
Secure the removed retainers in place at the location shown in the following gure.
Use the screws that you removed in step
A
.