Setup Guide

Installing the Machine
19
 Never install the machine in a location subject to wide uctuations in temperature or humidity.
 Never install the machine in a location subject to shaking or vibration.
 Never install the machine in a location where the oor is tilted, not level, or unstable.
 Never install the machine in a dusty or dirty location or outdoors.
 Never install the machine in a location exposed to direct sunlight or near air-conditioning or heating
equipment.
 Never install the machine in a location exposed to considerable electrical or magnetic noise or other forms
of electromagnetic energy.
 Never install the machine in an environment where silicone substances (oil, grease, sprays, etc.) are present.
Doing so may cause poor switch contact.
Installation Space
Ensure that at least the following amount of space is available.
Space for opening the dust box cover
Space to enable easy access of the power plug by hand
" P. 44 "External Dimensions"
About Height
The installation location should be above the work oor by 0.6 m (23.6 in.) or more. This machine is a desk-
top-type unit. Install this machine in a position so that you can easily reach the emergency stop button when
operating this machine.
Ensure that a height is available to enable the opening of the front cover.
1108 mm
(43.6 in.)
600 mm (23.6 in.)
or more
Work oor
Emergency stop button
Installation space
Work space
1 m (39.4 in.)
1 m (39.4 in.)
2 m (78.7 in.)
2 m (78.7 in.)