Owner`s manual

95
Registering and recalling mixer settings (Scene)
Section 2
Rev0.02
Clearing an Auto Scene
1. Press MARKER [SEARCH ] or [SEARCH ] to
move to the marker with the scene assignment you
wish to clear.
This marker will be shown in the display’s Marker box.
2. Press MARKER [CLEAR].
The current marker will be cleared together with the
scene that was assigned to it.
If a scene has also been assigned to some other marker,
the scene itself won’t be erased; only the current marker
will be erased.
Disabling Auto Scene
Auto Scene can actually hinder your work in certain
situations if settings are automatically restored while you are
manually operating track faders and the like.
In such cases, use the following procedure to disable Auto
Scene and prevent it from changing your settings.
1. Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2. Move the cursor to the SYSTEM icon and press
[ENTER/YES].
Alternatively, you can press [F2] (SYSTEM) if the
SYSTEM icon is currently displayed.
The System parameter setting screen will appear.
fig.10-03d
3. Move the cursor to “Auto Scene” and select “OFF”
using the TIME/VALUE dial.
Auto Scene will now be disabled.
fig.13-07d
To enable Auto Scene once again, return the above
setting to “ON.”
4. If you wish to store the modified settings, save the
current song (p. 70).
Setting Auto Scene control of
effects and track EQ
Use the following procedure to allow or forbid the control of
effects (i.e., insert effects, Vocal Tool Box, Speaker Modeling,
and Mastering Tool Kit) and of track EQ by Auto Scene.
1. Press [UTILITY].
The Utility screen will appear.
2. Move the cursor to the SYSTEM icon and press
[ENTER/YES].
Alternatively, you can press [F2] (SYSTEM) if the
SYSTEM icon is currently displayed.
The System Parameter screen will appear.
3. Move the cursor to “Effects” or “Track EQ” and select
“ON” or “OFF” using the TIME/VALUE dial.
fig.10-03d
ON: Control by Auto Scene is allowed.
OFF: Control by Auto Scene is forbidden.
4. If you wish to store the modified settings, save the
current song (p. 70).
Take care not to forget if “Auto Scene” is set to
“OFF” when saving a song, or Auto Scene will not
function afterwards. We recommend returning this
setting to “ON” as often as possible when saving
songs.