Owner`s manual

Rev0.02

Saving your song (Song Save)

In the BR-1200CD, recorded or edited audio data is only temporarily stored on the hard disk until the corresponding

song is saved. If the power is turned off without saving the song, all newly recorded audio data, edited data,

modified mixer settings, etc. will be lost. The Save function prevents this from occurring by storing the recorded and

edited data on the BR-1200CD’s hard disk.

fig.07-11

1 With the top screen displayed, hold down

[STOP] and press [REC].

The message “Save Current?” will appear.

fig.07-11ad

2 Press [ENTER/YES]. (If you do not want to

save, press [EXIT/NO].)

The message “Storing Current...” will appear on the

screen and saving of the song will begin. When saving

has been completed, the message “Complete!” will

appear.

Song Protect has activated for the demo songs already included in the BR-1200CD at the time of purchase; accordingly,

the message “Protected Song!” will be displayed at this time and it will not be possible to save the song.