Owner`s manual

63
Rev0.02
Basic Operation
Setting an audio input’s left-right position (Input Pan)
When recording from a number of different microphones at the same time or in other similar situations, you can
widen the overall sound by setting the left-right position (i.e., the pan) of each microphone before recording is
started.
fig.07-34a
1 Press CHANNEL EDIT [PAN].
The pan setting screen will appear.
fig.07-34d
2 Move the cursor to “IN,” and use the TIME/
VALUE dial to make a new pan setting.
The setting can also be carried out using the
VALUE1/PAN knob.
L100: Audio is moved to the extreme left.
0: Audio is moved to the center.
R100: Audio is moved to the extreme right.
You can press [F1]–[F3] at this point to set the pan at a
single touch.
[F1] (LEFT): L100
[F2] (CENTER): 0
[F3] (RIGHT): R100
2
2
1
After recording, the pan values set here for each audio input are automatically copied to the corresponding recorded tracks.