Owner`s manual

62
Rev0.02
Adjusting the recording level
fig.07-33
1 Play the instrument to be recorded.
The level meters on the display change in response to
the instrument’s volume.
fig.07-33ad
2 Use the INPUT LEVEL knob to ensure that the
peak display for any level meter does not rise
above 0 dB when the instrument is played
hard.
2
1
Rather than changing the volume of effect inputs, the INPUT LEVEL knob adjusts the volume after effects have been
applied. As a result, factors such as distortion and the effect of compressors are not influenced by this knob.