Owner`s manual

Rev0.02

Basic Operation

Basic operation of the recorder

Playing and stopping

fig.07-09

1 In order to avoid being startled by sudden loud

noises, turn the PHONES VOLUME knobs and

the MASTER fader all the way down before

proceeding.

2 Press [PLAY].

The BR-1200CD will start playback. The playback

position is shown in real time at the top of the display.

In addition, the playback volume for each track is

indicated by the level meters.

3 Slowly raise the PHONES VOLUME knob(s)

and the MASTER fader until the playback can

be heard at a suitable level.

4 Press [STOP].

The BR-1200CD will stop playback.

Using a foot switch

With a foot switch (such as the optional BOSS US-5U or Roland DP-2) connected to the FOOT SW jack on the BR-

1200CD’s rear panel, you can use your foot to start and stop performance. Use the following procedure to set the

function of the foot switch.

1 Press [UTILITY].

The Utility Menu screen will appear.

fig.07-05d

2 Move the cursor to the SYSTEM icon and press

[ENTER/YES].

fig.07-06d

3 Move the cursor to Foot Switch and select

“PLAY/STOP” using the TIME/VALUE dial.

4 Press [EXIT/NO] several times to return to the

top screen.

5 Operate the foot switch.

The song will alternate between play and stop each

time you press the foot switch.

1,3