Owner`s manual

312
Insert effect parameter functions
Rev0.02
Frequency 0–100
Adjusts the center frequency of the wah effect.
Peak 0–100
Adjusts the way in which the wah effect is applied to the area
around the center frequency. Lower values will produce a wah effect
over a wider area; higher values, a wah effect over a narrower area.
When the setting is 50, a standard wah sound will be produced.
* With a value of “50” a standard wah sound will be produced.
Level 0–100
This parameter adjusts the volume.
● When “PEDAL” is selected
The effect of the wah pedal can be reproduced by operating an
expression pedal.
For a more detailed explanation, see “Using an expression pedal” (p.
124).
Peak 0–100
Adjusts the way in which the wah effect is applied to the area
around the center frequency. Lower values will produce a wah effect
over a wider area; higher values, a wah effect over a narrower area.
When the setting is 50, a standard wah sound will be produced.
Level 0–100
This parameter adjusts the volume.