Owner`s manual

294
Insert effect parameter functions
Rev0.02
3 Band Equalizer
This is the 3-band equalizer.
High Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the high-
range equalizer.
High Freq 1.0 –16 kHz
This parameter sets the frequency for the high range equalizer.
High Q 0.5–16
This parameter sets the range of change in gain for the frequency set
by “High Freq.” A larger value results in a narrower range of
change.
Mid Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the
midrange equalizer.
Mid Freq 164 Hz–2.6 kHz
This parameter sets the central frequency for the midrange equalizer.
Mid Q 0.5–16
This parameter sets the range of change in gain for the frequency set
by “Mid Freq.” A larger value results in a narrower range of change.
Low Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the low
range equalizer.
Low Freq 31–500 Hz
This parameter sets the frequency for the low range equalizer.
Low Q 0.5–16
This parameter sets the range of change in gain for the frequency set
by “Low Freq.” A larger value results in a narrower range of change.
Level -20–+20 dB
This sets the overall volume level after equalization.
4 Band Equalizer
This is the 4-band equalizer.
On/Off OFF, ON
This parameter turns the equalizer on or off.
Low Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the low
range equalizer.
Low-Mid Freq 100 Hz–10.0 kHz
This parameter sets the central frequency for the low-midrange
equalizer.
Low-Mid Q 0.5–16
This parameter sets the range of change in gain for the frequency set
by “Low-Mid Freq” A larger value results in a narrower range of
change.
Low-Mid Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the low-
midrange equalizer.
Hi-Mid Freq 100 Hz–10.0 kHz
This parameter sets the frequency for the high-midrange equalizer.
Hi-Mid Q 0.5–16
This parameter sets the range of change in gain for the frequency set by
“Hi-Mid Freq” A larger value results in a narrower range of change.
Hi-Mid Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the high-
midrange equalizer.
High Gain -20–+20 dB
This parameter sets the gain (amount of boost or cut) for the high-
range equalizer.
Level -20–+20 dB
This sets the overall volume level after equalization.
Bass Simulator
This simulates the sound of a bass guitar. You can use it to
recreate the sound of a bass guitar while playing an electric
guitar. Note that you should avoid playing chords when
using the Bass Simulator.
On/Off OFF, ON
This parameter turns the bass simulator effect on or off.
Character LOOSE, TIGHT
This sets the bass tone characteristic. LOOSE produces the sound of a
thicker string gauge.
Level 0–100
This adjusts the overall volume of the bass simulator.
Bass Cut Filter
This filter cuts out vocal pop and other unwanted lower
range noise. In this, it simulates the bass cut switch found on
certain microphones.
On/Off OFF, ON
This setting turns the Bass Cut Filter on or off.
Cut Off Freq THRU, 20–2000 Hz
Thru will generally be used; however, you can use this parameter to
adjust the frequency if the attack contains an unwanted low-band
component.