Owner`s manual

28
Panel Descriptions
Rev0.02
Rear Panel
fig.0005-06
1. POWER switch
Use this switch to turn the BR-1200CD on and off (p. 36).
2. DC IN (AC adaptor) jack
Connect the BR-1200CD’s AC adaptor to this jack.
In order to prevent accidents, avoid using any AC adaptor
other than the AC adaptor supplied with this unit.
3. Cord hook
Loop the AC adaptor’s cord around this hook in order to
prevent its plug from being pulled out accidentally. If the AC
adaptor should be disconnected while you are using the BR-
1200CD, there is a danger of important audio data being
permanently lost.
4. USB connector
Plug a USB cable into this connector when you want to
exchange data between the BR-1200CD and a PC.
“Section 7 Using USB” (p. 257)
5. MIDI OUT connector
The BR-1200CD transmits MIDI data via this connector.
Connect the MIDI IN connector of external MIDI devices
such as rhythm machines, sequencers, and sound modules to
this connector using a MIDI cable.
“Section 6 Using MIDI” (p. 241)
6. MIDI IN connector
The BR-1200CD receives MIDI data via this connector.
Connect the MIDI OUT connector of external MIDI devices
such as sequencers to this connector using a MIDI cable.
“Section 6 Using MIDI” (p. 241)
7. DIGITAL OUT connector
This optical-type connector is used to output digital audio
signals from the BR-1200CD, and its output is identical to
that of the LINE OUT jack. You can use the DIGITAL OUT
connector to record the BR-1200CD’s output on CD-R or MD
recorders. In addition, it can also be used to make
connections with amplifiers, speakers, and other devices
with digital inputs.
8. FOOT SW jack
Use this jack to connect a separately sold foot switch (such as
the Roland DP-2 or BOSS FS-5U). With a foot switch
connected, you can use it to carry out remote-control
operations such as the start and stop of playback or punch-
in/out.
“Using a foot switch” (p. 39)
9. EXP (Expression) PEDAL jack
Use this jack to connect a separately sold expression pedal
(such as the Roland EV-5 or BOSS FV-500L/FV-500H). When
connected, an expression pedal allows you to use the internal
effects processor’s pedal wah and other similar effects.
“Using an expression pedal” (p. 124)
1 54 6 7 10 11 12 8 923
13
14