Owner`s manual

277

Section 8

Rev0.02

Mixing audio-device output with the BR-1200CD’s output (Audio Sub Mix)

The Audio Sub Mix function allows LINE IN to be directly

mixed with the audio being output via the LINE OUT jacks.

Accordingly, you can use this function to mix the BR-

1200CD’s audio output with audio from an external audio

device without having to prepare a separate mixer.

Audio Sub Mix is set up as described below.

fig.53-21

1. Press [UTILITY].

The Utility screen will appear.

fig.12-12d

2. Move the cursor to the SYSTEM icon and press

[ENTER/YES].

Alternatively, you can press [F2] (SYSTEM) if the

SYSTEM icon is currently displayed.

The System Parameter screen will appear.

fig.10-03d

3. Move the cursor to “Sub Mixer” and select “ON” using

the TIME/VALUE dial.

fig.53-24d

2,3

Precautions for Audio Sub Mix usage

• The Audio Sub Mix setting is returned to “OFF”

whenever the BR-1200CD is turned on.

• When either LINE has been selected from INPUT

SELECT, LINE IN will give priority to track

recording; therefore, the Audio Sub Mix function

will remain inactive even if it is turned on.