Owner`s manual

268
With Macintosh
Rev0.02
Reading backup data back into the
BR-1200CD from the PC (Recover)
1. Initialize the BR-1200CD’s hard disk. (p. 285)
Note that all of the data on the BR-1200CD’s hard disk
will be deleted as a result of this operation, and if
necessary, you should make a separate backup.
2. Connect your computer and the BR-1200CD with a USB
cable.
3. Confirm that the recorder is stopped, then press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
4. Move the cursor to the USB icon and press [ENTER/
YES].
Alternatively, you can press [F1] (USB) if the USB icon is
currently displayed.
The USB screen will appear.
fig.52-05d
5. Move the cursor to “RECOVER” and press [ENTER/YES].
Alternatively, you can press [F2] (RECOVER).
“Waiting...” appears in the display, and then
“Connecting...” is displayed.
When connection with the PC has been established, the
message will change to “Copy Files To BR-1200CD.”
fig.52-11ed
Shortly after the connection has been established, the BR-
1200CD icon will appear on-screen.
fig.52-07b
With Mac OS 9.1.x / 9.2.x
6. Open the folder on the PC where you have stored the
backup data.
All of the backup files and folders will appear on-screen.
7. Select all of the backup files and folders.
8. Copy them to the “BR-1200CD” icon on the computer.
All of the files and folders copied in Step 7 will be
returned to the BR-1200CD’s internal hard disk.
9. Quit the connection to the computer.
Drug the BR-1200CD icon to the Trash.
10. Press BR-1200CD’s [EXIT/NO].
The message “Now Re-Loading...” will appear on the
BR-1200CD’s display, and the most recently selected
song will be reloaded.
When reloading has been completed, the display will
return to the USB screen.
If you press [EXIT/NO] without quitting the connection
to the computer, “Disconnect USB, OK?” appear. In this
case, pressing [ENTER/YES] returns the USB menu
screen to the display.
11. Press [EXIT/NO] to return to the Top screen.
At this point, you can safely disconnect the USB cable
from the BR-1200CD and the computer.
BR-1200CD
(Ex.)
Extra care should be taken to ensure that each and
every file and folder is selected and copied. If files or
folders are missed, the recovery will be incomplete and
subsequent recovery operations may not be possible.
During the recovery operation you may encounter
messages asking whether it is all right to overwrite
certain files—you should select “YES” in every
instance. If “NO” is selected even once, the recovery
operation will be incomplete, and this may prevent
the BR-1200CD from operating correctly.
If the current song contains newly recorded audio
data or newly modified settings, the message “Save
Current?” may be displayed during the recovery
procedure. If you want to save your song before
starting the recover process, press [ENTER/YES];
if this will not be necessary, press [EXIT/NO].
Remember that if you do not save a modified song
at this time, all newly recorded audio data, edited
data, modified mixer settings, etc. will be lost.