Owner`s manual

265
With Windows
Section 7
Rev0.02
Loading WAV/AIFF files in
BR-1200CD tracks
(WAV/AIFF Import)
You can take WAV or AIFF files on your computer, such as
files created with audio software applications, and load them
to the BR-1200CD’s tracks.
Wave data in the following formats can be imported.
You cannot import wave data in other formats.
WAV or AIFF format
Mono or Stereo
8-bit or 16-bit
Sampling Rate: 44.1 kHz
Add the extension “WAV” to imported WAV files and
the extension “AIF” to imported AIFF files.
Compressed WAV files or AIFF files cannot be loaded.
Extremely short waveform data (less than approximately
1 sec) cannot be loaded.
The loop point settings within an AIFF file will be
ignored.
1. Connect your computer and the BR-1200CD with a USB
cable.
2. Confirm that the recorder is stopped, then press
[UTILITY].
The Utility Menu screen will appear.
fig.12-12d
3. Move the cursor to the USB icon and press [ENTER/
YES].
Alternatively, you can press [F1] (USB) if the USB icon is
currently displayed.
The USB screen will appear.
fig.52-05d
4. Move the cursor to the IMPORT icon and press
[ENTER/YES].
Alternatively, you can press [F3] (IMPORT).
The USB Import screen will appear.
fig.52-22d
5. Use [CURSOR] and the TIME/VALUE dial to select the
track and the V-Track to be loaded.
When loading to the tracks in mono
Select the track 1–8.
fig.52-23d
When loading to the tracks in stereo
Select the track combination 1/2–11/12.
fig.52-24d
6. Use [CURSOR] and the TIME/VALUE dial to specify
the measure or position in the track from which
loading is to start.
Pressing [F1] (DISP) at this time will allow you switch
among the specification methods for positions (i.e., by
bar, time, or marker).
fig.52-25d
7. Press [F3] (GO).
When the connection is complete, the message “Copy 1
Wave File To BR-1200CD’s USB Folder.” will appear.
The computer soon recognizes the BR-1200CD, and “My
Computer” opens on the computer.
The “BR-1200CD” icon (or “Removable Disk (*:)” icon)
appears in “My Computer.”
fig.52-07
BR-1200CD
Removable Disk (*:)
(Ex.)