Owner`s manual

228
Using the CD-R/RW drive to exchange data
Rev0.02
Saving Data on the Hard
Disk to CD-R/RW Discs
Saving Data to CD-R/RW Discs
(User Backup)
The BR-1200CD allows you to back up the following types of
user data to CD-R/RW discs.
• Insert effect patches
• Mastering Tool Kit patches
• Speaker Modeling patches
• Vocal Tool Box patches
• Rhythm arrangements, drum patterns, bass patterns
• Loop Phrases
1. Insert an empty CD-R/RW disc into the BR-1200CD’s
CD-R/RW drive.
The drive’s access indicator will begin to flash. Wait until
this indicator stops flashing and turns off before
proceeding.
2. Press CD-R/RW [DATA SAVE/LOAD].
The Data CD screen will appear.
fig.41-05d
3. Move the cursor to BACKUP icon, and press [ENTER/
YES].
Alternatively, you can press [F1] (BACKUP) if the
BACKUP icon is currently displayed.
The Backup Menu screen will appear.
fig.41-01d
4. Press [F2] (USER) or move the cursor to USER icon, and
then press [ENTER/YES].
The User Backup screen will appear.
fig.41-07d
5. Move the cursor to the type of data you want to back up
and press [F1] (SELECT).
The data will selected for backup.
fig.41-07ad
A number of types of data can be selected in this way for
backup, and an asterisk (*) will be displayed for each
selected type. To cancel a selection, simply press [F1]
once again.
Data that can be backed up:
Effects/Rhythm:
• Insert Effects User Patches
• Vocal Tool Box User Patches
• Mastering User Kit User Patches
• Speaker Modeling User Patches
• User Rhythm Arrangement
• User drum pattern
• User bass pattern
The data described above will all be saved.
Loop Phrase:
User loop phrases will all be saved.
If you would like to back up all such data on the hard
disk in a single operation, press [F2] (ALL). All data
types will be selected for backup.
To cancel this selection, press [F2] once again. This
deselects all data types.
6. When you have selected all of the data you want to
back up, press [F3] (GO).
The message “Write Speed?” will appear.
fig.41-08d
7. Use the TIME/VALUE dial to set the write speed.
8. Press [ENTER/YES].
If you want to cancel the backup, press [EXIT/NO].
The message “Write Sure?” will appear.
fig.41-09d