Owner`s manual

224
Creating Audio CD
Rev0.02
Playing Back Audio CDs
Let’s now listen to the audio CD we have just created using
the BR-1200CD’s CD-R/RW drive. In addition to CD-R discs,
this drive can be used to play back CD-RW discs that cannot
be played on standard CD players. Naturally, you will also
be able to listen to commercially produced audio CDs on this
drive, and it can even play back audio CDs created using the
BR-1200CD that have not yet been finalized.
Songs recorded on an audio CD are often referred to as
“tracks.” Be careful to avoid confusing these tracks with
the BR-1200CD's audio tracks.
1. Insert the audio CD into the CD-R/RW drive.
2. Press [AUDIO CD WRITE/PLAY].
The Audio CD screen will appear.
fig.07-57d
3. Press [F2] (PLAY).
The message “Now Checking...” will appear initially,
and the menu screen for the audio CD player will then
be displayed.
Here, the songs included in the audio CD will be listed
from TR01 up as far as TR 99.
fig.07-73d
4. Use the TIME/VALUE dial to select the song that you
want to listen to.
fig.07-73ad
5. Move the cursor to the icon and press [ENTER/
YES].
Playback of the audio CD will begin.
fig.07-73bd
You can move the cursor to the following icons and
press [ENTER/YES] to control playback in various ways.
: Play
: Pause
: Stop
: Fast forward
: Rewind
: Skip forward to the next song
: Skip back to the beginning of the song or to the
previous song
6. If you want to stop playback of the audio CD, press
[EXIT/NO] several times to return to the top screen.
7. Press the CD-R/RW drive’s EJECT button to eject the
disc.
It may take a period of several seconds before the disc is
actually ejected.
When an audio disc is inserted into the CD-R/RW
drive, the message “Now Checking...” may remain
on the screen for a relatively long time. This period
of time is required for reading of the data stored on
the audio CD and it is not the result of a
malfunction.