Owner`s manual

Panel Descriptions

Rev0.02

fig.0005-02

11. ZERO button

Press to jump to the very beginning of the song.

12. REW button

The song will rewind while you hold down this button.

13. FF button

The song will fast-forward while you hold down this button.

14. REPEAT button

Selects a section of your song to listen to repeatedly (“Playing

back repeatedly (Repeat Function)” (p. 74)).

This function is useful when you want to record several

times using punch-in and punch-out (p. 75) before saving the

best performance.

15. STOP button

This button stops song playback or recording.

16. PLAY button

Starts playback of your song. Alternatively, if [REC] has been

pressed and its indicator is flashing, you can also start

recording by pressing [PLAY]. During playback or recording,

this button’s indicator will light up in green.

17. REC (record) button

This is the BR-1200CD’s record button, and in addition to

normal recording, it is also used to perform manual punch-in

and punch-out. This button’s indicator will turn red and

begin to flash when the BR-1200CD is standing by to start

recording, and this will change to a steady red when

recording is actually started.

18. PAN button

This calls up a screen that allows settings to be made for the

pan (i.e., the left-right position) of each playback track and

input source (p. 82).

19. COMP (compressor) button

This calls up a screen for setting of each track’s compressor

parameters so that variations in volume may be suppressed

(p. 82).

20. EQ (equalizer) button

This calls up a screen that allows setting of each track’s

equalizer parameters so that the sound of the corresponding

track can be adjusted (p. 83).

21. CHORUS/DELAY button

This calls up either a screen for setting of the send level from

each track to the loop effects chorus/delay, or a screen that

allows selection of chorus or delay effects and the setting of

parameters for these effects (p. 125).

15 16 17