Owner`s manual

214
Creating Drum and Bass Patterns Simply and Easily (EZ Compose)
Rev0.02
Adding a chord progression
By selecting the desired chord progression from those made
available on the unit, and adding it to the currently selected
pattern, you can have bass parts be played according to the
selected chord progression.
1. Press [F2] (=>CHORD).
The EZ Compose Chord Progression screen will appear.
fig.04-1910d
2. Move the cursor to the relevant item, then use the
VALUE dial to set the value.
TEMPO 25.0–250.0
This sets the tempo.
TYPE / NO
This selects the preset chord progression type and
number.
Type:
2MEAS Maj, 2MEAS Min, 4MEAS Maj, 4MEAS Min,
8MEAS Maj, 8MEAS Min, BLUES Maj, BLUES Min
* If you choose “- - - - - - - - -,” the chord progression setting will
not be used.
KEY C–B
This sets the key for the performance. The key of the
chord progression is shifted to match the KEY setting.
TIMES 1–32
This sets the number of times the chord progression is to
be repeated.
* MEAS (number of measures) is determined automatically by
the TYPE/No. and TIMES settings. You cannot directly
change the number of measures.
The screen shows the chord progression you specified.
Press [PLAY] to play the pattern with the current
settings.
Adding a fill-in
You can choose from a variety of fill-ins and add them to the
currently selected pattern.
1. Press [F2] (=>FILL IN).
The EZ Compose Fill-in screen will appear.
fig.04-1920d
2. Move the cursor to the relevant item, then use the
VALUE dial to set the value.
TEMPO 25.0–250.0
This sets the tempo.
INTERVA: SMALL 1–32MEAS
Specify the number of measures after which a Small
(short) fill-in will be added
(Example)
If you set this to 4MEAS, a small fill-in will be added at
measure 4, measure 8, measure 12, ... etc.
* If the number of measures specified by INTERVAL is greater
than the number of measures in the pattern, the fill-in will not
be played.
No.: SMALL - - - -, S001–S050, L001–L050
Number of preset (Small fill-in) to use
* If you choose “- - - -” the Small fill-in will not be added.
INTERVAL: LARGE 1–32MEAS
Specify the number of measures after which a Large
(long) fill-in will be added
(Example)
If you set this to 16MEAS, a Large fill-in will be added at
measure 16, 32, 48, ... etc.
* If the number of measures specified by INTERVAL is greater
than the number of measures in the pattern, the fill-in will not
be played.
No.: LARGE - - - -, S001–S050, L001–L050
Number of preset (Large fill-in) to use
* If you choose “- - - -” the Large fill-in will not be added.
* If the Small fill-in and Large fill-in occur at the same measure,
the Large fill-in will take priority.