Owner`s manual

207
Creating rhythm arrangements
Section 4
Rev0.02
Naming and saving rhythm
arrangements
The following section describes how to name and save the
rhythm arrangements that you create.
Unless the song is saved, all rhythm arrangement data
will be lost when a different rhythm arrangement is
selected or a new song is loaded. In addition, this data
will also be lost if you turn off the BR-1200CD before
saving your data. It is a good idea, therefore, to regularly
save rhythm arrangements that you intend to use again.
1. Press PROGRAMMABLE RHYTHM [ARRANGEMENT/
PATTERN] so the ARRANGEMENT indicator is lighted.
(Arrangement mode)
2. Press PROGRAMMABLE RHYTHM [EDIT].
The Rhythm Arrangement Selection screen will appear.
fig.21-33d
3. Press [F1] (EDIT).
The Rhythm Arrangement Edit screen will appear.
fig.21-26d
4. Press [F1] (NAME).
The Rhythm Arrangement Name screen will appear.
fig.04-1711d
5. Use [CURSOR] and the TIME/VALUE dial to change
the name character by character.
At this time, the FUNCTION buttons operate as follows.
[F1] (INSERT):
An empty space of one character in length will be
inserted.
[F2] (DELETE):
A single character will be deleted.
[F3] (A<=>a):
The character type will toggle between uppercase and
lowercase.
6. Once you’ve made all the desired modifications, press
[EXIT/NO] twice.
The Rhythm Arrangement Selection screen will appear
once again.
7. Press [F3] (WR•CPY•DEL).
The Write screen for rhythm arrangements will appear.
fig.21-28d
8. Use the TIME/VALUE dial to select the rhythm
arrangement to which the data is to be saved.
Only user rhythm arrangements and song rhythm
arrangements may be selected for saving rhythm
arrangement data. You will not be able to select a preset
rhythm arrangement at this time.
9. Press [F3] (GO).
The rhythm arrangement will be saved. When the
message “Complete!” appears, it indicates that saving
has been completed.