Owner`s manual

200
Creating rhythm arrangements
Rev0.02
Erasing All Pattern Assignments
at One Time
To erase all pattern assignments at one time, carry out the
following procedure in the Rhythm Arrangement View
screen.
1. Move the cursor to the type of pattern you want to erase
(“DRUM” or “BASS”), then press [F2] (CLEAR).
The message “Sure?” will appear.
2. Press [ENTER/YES].
All patterns of the type indicated by the cursor position
are erased.
Inserting patterns
Use the following procedure in the screen for assembling
drum patterns or bass patterns into rhythm arrangements to
insert a new pattern between two that have already been
positioned.
1. Move the cursor to “MEAS” and select the measure for
insertion using the TIME/VALUE dial.
2. Press [F1] (INSERT).
A one-measure length pattern (P001) is inserted.
3. Move the cursor to “PATTERN,” then use the TIME/
VALUE dial to select the desired pattern.
Inputting chords
Simply assembling bass patterns into rhythm arrangements
will result in the same bass line being repeated over and
over. By also inputting chords at the correct positions, you
can have you BR-1200CD automatically adjust the bass
performance to notes that match the chord progression.
1. Press PROGRAMMABLE RHYTHM [ARRANGEMENT/
PATTERN] so the ARRANGEMENT indicator is lighted.
(Arrangement mode)
2. Press PROGRAMMABLE RHYTHM [EDIT].
The Rhythm Arrangement Selection screen will appear.
fig.21-33d
3. Press [F2] (VIEW).
The Rhythm Arrangement View screen will appear.
fig.21-11d_arrangeedit.bmp
4. Move the cursor to “CHORD” and press [F3] (MAP
EDIT).
The Chord Map screen will appear.
fig.21-12d
5. Use [V-TRACK], track buttons [1] through [11/12], or
[TRACK MUTE] to input the note names for chords.
In addition, you can also turn the TIME/VALUE dial
while a track button is being held to select different types
of chords.
Selectable chord types
- - - (N.C) Maj m 7 sus4
dim aug M7 M9 add9
6 6(9) 7sus4 7 b 5 7(13)
9 7b9 7#9 m7 m7 b 5
m6 m6(9) madd9 m9 mM7
mM9 aug7