Owner`s manual

190
Creating Loop Phrases
Rev0.02
Using wave data on a CD-ROM/R/
RW disc (Loop Phrase Import)
If the audio data you want to use for a Loop Phrase is
contained as an AIFF or WAV file on a CD-ROM, CD-R, or
CD-RW disc, this data can be easily imported into a selected
phrase.
Using this function, you will be able to import audio data
from commercially available sampling CDs and from CD-R
or CD-RW discs that you have created using a PC.
Only data of the following format can be imported.
• WAV or AIFF audio
• Mono or stereo
•8 or 16 bit
• 44.1 kHz sampling rate
• 0.5 seconds (approx.) to 30minutes (approx.) in length.
• CD-R/RW discs of ISO9660 Level 2, Mode 1 format are
supported for import. It will not be possible to import
data from discs of any other format.
• The name of the audio data file will be originally
assigned to the destination Loop Phrase. For more
details regarding the method for changing phrase
names, refer to “Specifying and modifying the source
loop phrase (Time Modify)” (p. 192).
fig.20-093
1. Insert a CD-ROM, CD-R, or CD-RW containing audio
data in WAV or AIFF format into the BR-1200CD’s CD-
R/RW drive.
The drive’s access indicator will begin to flash. Wait until
this indicator stops flashing and turns off before
proceeding.
2. Press CD-R/RW [LOOP PHRASE IMPORT].
The Loop Phrase Menu screen will appear.
fig.20-090d
3. Move the cursor to the IMPORT icon and press
[ENTER/YES].
Alternatively, you can press [F1] (IMPORT) if the
IMPORT icon is currently displayed.
The Loop Phrase Import screen will appear, displaying a
list of the WAV and AIFF files contained on the CD.
fig.20-095d
If files are grouped into different folders on this disc, the
folder names are displayed together with the folder icon
( ). To view the list of files within a folder, move the
cursor to the corresponding folder name and press
[ENTER/YES].
4. Press [F1] (TYPE) to change the type of audio file to be
imported.
This button toggles between WAV and AIFF formats.
5. Position the cursor on the file you want to import.
6. If you would like to hear the audio contained in the
file, press [F2] (PREVIEW).
The BR-1200CD will play the contents of the audio file (Preview).
Press [ENTER/YES] once again when you want to stop
playback.
7. When you have selected a file, press [ENTER/YES].
The screen for selecting the import-destination Loop
Phrase appears.
fig.04-1240d
2
3,7
3,5
8
146 9