Owner`s manual

182
Creating bass patterns
Rev0.02
Copying bass patterns
1. Press [F3] (WR•CPY•DEL) on the Bass Pattern Edit
screen.
The Write bass patterns will appear.
fig.20-054d
2. Press [F1] (=>COPY).
The Copy screen for bass patterns will appear.
fig.20-254dfig.20-054d
3. Move the cursor to the “From:” field and select the bass
pattern to be copied using the TIME/VALUE dial.
4. Move the cursor to “To:” and use the TIME/VALUE
dial to select the bass pattern to which the data is to be
copied.
Only user bass patterns and song bass patterns may be
selected as destinations for copying. In other words, you
will not be able to select a preset bass pattern at this time.
5. Press [F3] (GO).
Copying of the bass pattern will begin. When the
message “Complete!” appears, it indicates that copying
has been completed.
Deleting bass patterns
1. Press [F3] (WR•CPY•DEL) on the Bass Pattern Edit
screen.
The Write bass patterns will appear.
fig.20-054d
2. Press [F2] (=>DELETE).
The Bass Pattern Delete screen will appear.
ig.20-078d_bassfrom.bmp
3. Use the TIME/VALUE dial to select the bass pattern to
be deleted and press [F3] (GO).
The message “Sure?” will appear.
fig.20-079d_bassfrom.bmp
4. Press [ENTER/YES].
Deletion of the bass pattern will begin. When the
message “Complete!” appears, it indicates that deletion
has been completed.
The bass pattern selected as the copy destination
will be overwritten in this process. As it will not be
possible to restore the corresponding data, care
should be taken to ensure that important patterns
are not accidentally overwritten in this way.
• As it will not be possible to restore deleted bass
patterns, care should be taken to ensure that
important patterns are not accidentally deleted.
• Preset patterns cannot be deleted.