Owner`s manual

181
Creating bass patterns
Section 4
Rev0.02
5. If you want to store the swing setting you have just
made, press [F3] (WR•CPY•DEL).
The Write screen for bass patterns will appear.
fig.20-054d
6. Use the TIME/VALUE dial to select the bass pattern to
which the data is to be saved.
Only user bass patterns and song bass patterns may be
selected for saving bass pattern data. You will not be
able to select a preset bass pattern at this time.
7. Press [F3] (GO).
The swing pattern will be saved together with the bass
pattern. When the message “Complete!” appears, it
indicates that saving has been completed.
Changing a bass pattern’s name
1. Press [F1] (NAME) on the Bass Pattern Edit screen.
fig.20-1000d
2. Use [CURSOR] and the TIME/VALUE dial to change
the name character by character.
At this time, the FUNCTION buttons operate as follows.
[F1] (INSERT):
An empty space of one character in length will be
inserted.
[F2] (DELETE):
A single character will be deleted.
[F3] (A<=>a):
The character type will toggle between uppercase and
lowercase.
3. Press [EXIT/NO].
The Bass Pattern Edit screen will appear once again.
4. Press [F3] (WR•CPY•DEL).
The Write screen for bass patterns will appear.
fig.20-154d
5. Use the TIME/VALUE dial to select the bass pattern to
which the data is to be saved.
Only user bass patterns and song bass patterns may be
selected for saving bass pattern data. You will not be
able to select a preset bass pattern at this time.
6. Press [F3] (GO).
The new name will now be stored together with the bass
pattern, and when the message “Complete!” appears, it
indicates that this operation has been completed.
If you select a different bass pattern or load a new
song without saving the current pattern, your new
swing setting will be lost. This setting will also be
lost if you turn off the BR-1200CD before saving.
Applying swing does not change the actual
performance data stored in a bass pattern.
Regardless of whether or not swing is actually
applied, performance data will always be displayed
at the same positions when you are using
Microscope.
If you select a different bass pattern or load a new
song without saving the current pattern, the new
name setting will be lost. This name will also be lost
if you turn off the BR-1200CD before saving.